With a single dedicated pump for each terminal unit, which control mode is used?
What is the key design element in Grundfos Distributed Pumping?
How does distributed pumping ensure minimum flow over each chiller?
Why must low-pressure non-return valves be installed for each cooling loop with AHU’s?
Test results
Congratulations. You have passed the test and completed the 69 - The Grundfos Distributed Pumping Course
Achieved badges:
Q: Pump energy savings in a distributed pumping system are around:
A: 25%
Q: Pump energy savings in a distributed pumping system are around:
A: 35%
Q: Pump energy savings in a distributed pumping system are around:
A: 54%
Q: With a single dedicated pump for each terminal unit, which control mode is used?
A: Proportional pressure
Q: With a single dedicated pump for each terminal unit, which control mode is used?
A: Proportional pressure or constant temperature – doesn’t matter
Q: With a single dedicated pump for each terminal unit, which control mode is used?
A: Constant temperature
Q: What is the key design element in Grundfos Distributed Pumping?
A: A new kind of intelligent valve
Q: What is the key design element in Grundfos Distributed Pumping?
A: The use of intelligent pumps instead of valves
Q: What is the key design element in Grundfos Distributed Pumping?
A: Making bypass lines obsolete
Q: How does distributed pumping ensure minimum flow over each chiller?
A: By having a differential pressure sensor installed across each chiller
Q: How does distributed pumping ensure minimum flow over each chiller?
A: By running with maximum flow at maximum load
Q: How does distributed pumping ensure minimum flow over each chiller?
A: By ensuring the primary pump is larger than in a conventional system
Q: How much flow is required to achieve almost 80 % of the capacity?
A: 50%
Q: How much flow is required to achieve almost 80 % of the capacity?
A: 30%
Q: How much flow is required to achieve almost 80 % of the capacity?
A: 80%
Q: Why must low-pressure non-return valves be installed for each cooling loop with AHU’s?
A: You don’t need non-return valves – intelligent pumps make all valves redundanteed
Q: Why must low-pressure non-return valves be installed for each cooling loop with AHU’s?
A: To avoid backflow in case the AHU unit is out of operation
Q: Why must low-pressure non-return valves be installed for each cooling loop with AHU’s?
A: You only need non-return valves for proportional pressure installations