How does the FCM module reduced chemical consumption?
At which flow rates does digital dosing perform best?
How does digital dosing ensure a significant reduction in the waste of chemicals?
How does the FCM module allow for the detection of any flow deviations in the system?
Test results
Congratulations. You have passed the test and completed the 33 - An Introduction to Digital Dosing
Achieved badges:
Q: How does the FCM module reduced chemical consumption?
A: By establishing a negative pressure in case of broken pipework
Q: How does the FCM module reduced chemical consumption?
A: By allowing lower concentrations of the chemicals
Q: How does the FCM module reduced chemical consumption?
A: By automatically stabilising the pump’s performance if temperature or flow is unstable
Q: At which flow rates does digital dosing perform best?
A: Small flow rates
Q: At which flow rates does digital dosing perform best?
A: Large flow rates
Q: At which flow rates does digital dosing perform best?
A: Digital dosing performs best over the full range of flow rates.
Q: How does digital dosing ensure a significant reduction in the waste of chemicals?
A: The delivered accuracy is very high, allowing you to monitor the required dosing almost to perfection.
Q: How does digital dosing ensure a significant reduction in the waste of chemicals?
A: The digital technology allows the pump to remember how many strokes the pump has delivered
Q: How does digital dosing ensure a significant reduction in the waste of chemicals?
A: The digital microcontroller remembers set-points with very high precision
Q: How does the FCM module allow for the detection of any flow deviations in the system?
A: By slowing down pumped volume in case of pipe damage, to prevent spilling of chemicals
Q: How does the FCM module allow for the detection of any flow deviations in the system?
A: By measuring pressure waves and issuing alarms when something unexpected is seen
Q: How does the FCM module allow for the detection of any flow deviations in the system?
A: By sending out an alarm if pressure built-up when the flow is blocked and reacting to other failures, such as cavitation or pipe burst and switching off the system if detecting serious failures